Filter
Top Products
190-01255-00 Rev. B
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
517
APPENDIX D
FREQUENTLY ASKED QUESTIONS
If a particular aspect of G1000H operational capability is not addressed by these commonly asked questions
or in the index, contact Garmin (see the copyright page or back cover for contact information) or a Garmin-
authorized dealer. Garmin is dedicated to supporting its products and customers.
what is sBas?
The Satellite Based Augmentation System (SBAS) uses a system of ground stations to correct any GPS signal
errors. These ground stations correct for errors caused by ionospheric disturbances, timing, and satellite
orbit errors. It also provides vital integrity information regarding the health of each GPS satellite. The signal
correction is then broadcast through geostationary satellites. This correction information can then be received
by any SBAS-enabled GPS receiver.
SBAS is designed to provide the additional accuracy, availability, and integrity necessary to enable users to rely
on GPS for all phases of flight.
There are several SBAS systems serving different parts of the world. The Wide Area Augmentation System
(WAAS) is currently available in the United States, including Alaska and Hawaii. The European Geostationary
NavigationOverlayService(EGNOS)offerscoverageofEurope,partsofthemiddleeastandnorthernAfrica.The
Multi-functional Satellite Augmentation System (MSAS) covers mainly Japan and parts of northern Australia.
hOw DOes sBas aFFect aPPROach OPeRatiOns?
Both LNAV/VNAV and LPV approaches use the accuracy of SBAS to include vertical (glide path) guidance
capability. The additional accuracy and vertical guidance capability allows improved instrument approaches to
an expanded number of airports throughout the U.S.
The implementation of LPV approaches further improves precision approach capabilities. LPV approaches
are designed to make full use of the improved GPS signal from the SBAS. This approach combines the LNAV/
VNAV vertical accuracy with lateral guidance similar to the typical Instrument Landing System (ILS). LPV
approaches allow lower approach minimums.
what is Raim anD hOw DOes it aFFect aPPROach OPeRatiOns?
RAIM is an acronym for Receiver Autonomous Integrity Monitoring. RAIM is a GPS receiver function that
performs the following functions:
•MonitorsandveriesintegrityandgeometryoftrackedGPS satellites
•Notiesthepilotwhensatelliteconditionsdonotprovidethenecessarycoveragetosupportacertainphase
of flight
•Predictssatellite coverageof adestination area todetermine whetherthe numberof availablesatellites is
sufficient to satisfy requirements
NOTE
: If RAIM is not predicted to be available for the final approach course, the approach does not become
active, as indicated by the “RAIM not available from FAF to MAP” message and the LOI annunciation
flagging on the HSI.