Filter
Top Products
190-01255-00 Rev. B
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
10
SYSTEM OVERVIEW
1.4 SECURE DIGITAL CARDS
NOTE:
Refer to the Appendices for instructions on updating the aviation database.
NOTE:
Ensure that the G1000H system is powered off before inserting the SD card.
The PFD and MFD data card slots use Secure Digital (SD) cards and are located on the top right portion of the
display bezels. Each display bezel is equipped with two SD card slots. SD cards are used for aviation database
and system software updates as well as terrain database storage.
Not all SD cards are compatible with the G1000H. Use only SD cards supplied by Garmin or the aircraft
manufacturer.
Install an SD card
Insert the SD card in the SD card slot, pushing the card in until the spring latch engages. The front of the card
should remain flush with the face of the display bezel.
Remove an SD card
Gently press on the SD card to release the spring latch and eject the card.
Figure 1-5 Display Bezel SD Card Slots
SD Card Slots