Garmin G1000H Marine Radio User Manual


  Open as PDF
of 548
 
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
190-01255-00 Rev B50
FLIGHT INSTRUMENTS
2.1 FLIGHT INSTRUMENTS
AIRSPEED INDICATOR
NOTE: Refer to the Rotorcraft Flight Manual (RFM) for speed criteria.
The Airspeed Indicator displays airspeed on a moving tape rolling number gauge.  The groundspeed is
displayedinknotsbelowtheAirspeedIndicator.Thenumericlabelsandmajortickmarksonthemovingtape
aremarkedatintervalsof10knots.Theminortickmarksonthemovingtapeareindicatedatintervalsof
veknots.Speedindicationstartsat20knots,with60knotsofairspeedviewableatanytime.Theindicated
airspeedisdisplayedinsidetheblackpointer.Thepointerremainsblackuntilreachingnever-exceedspeed
(V
NE
), at which point it turns red.
Figure 2-5 Red Pointer at V
NE
Figure 2-3 Airspeed Indicator
Indicated
Airspeed
Gound
Speed
Speed
Ranges
Figure 2-4 Shutter Covers
Indicated Airspeed
Acolor-coded(yellow,green,andred)speedrangestripislocatedonthemovingtape.Thecolorsdenote,
normaloperatingrange,cautionrange,andnever-exceedspeed(V
NE
).
A black and white checkered shutter covers the airspeed indication at or below 15 knots, and remains
displayeduntilreaching20knots.
The Airspeed Trend Vector is avertical, magenta line that appearsto the right ofthe color-coded speed
rangestripwhenairspeediseitheracceleratingordecelerating.Oneendofthemagentalineisanchoredto
the tip of the airspeed pointer while the other end moves continuously up or down corresponding to the rate
of acceleration or deceleration. For any constant rate of acceleration or deceleration, the moving end of the
line shows approximately what the indicated airspeed value will be in six seconds. If the trend vector crosses
V
NE
, the text of the actual airspeed readout changes to yellow. The trend vector is absent if the speed remains
constant or if any data needed to calculate airspeed is not available due to a system failure.
Airspeed
Trend
Vector
 previous next