Filter
Top Products
190-01255-00 Rev. B
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
499
APPENDIX A
MISCELLANEOUS MESSAGE ADVISORIES (CONT.)
Message Comments
MAG VAR WARN
– Large magnetic
variance. Verify all course angles.
The GDU’s internal model cannot determine the exact magnetic variance for geographic
locations near the magnetic poles. Displayed magnetic course angles may differ from
the actual magnetic heading by more than 2°.
SVS
– SVS DISABLED: Out of
available terrain region.
Synthetic Vision is disabled because the aircraft is not within the boundaries of the
installed terrain database.
SVS
– SVS DISABLED: Terrain DB
resolution too low.
Synthetic Vision is disabled because a terrain database of sufficient resolution (9 arc-
second or better) is not currently installed.
SCHEDULER [#]
– <message>. Message criteria entered by the user.
CHECK CRS
– Database course for
LOC1 / [LOC ID] is [CRS]°.
Selected course for LOC1 differs from published localizer course by more than 10
degrees.
CHECK CRS
– Database course for
LOC2 / [LOC ID] is [CRS]°.
Selected course for LOC2 differs from published localizer course by more than 10
degrees.
[PFD1, PFD2, or MFD1]
CARD
1 REM
– Card 1 was removed.
Reinsert card.
The SD card was removed from the top card slot of the specified PFD or MFD. The SD
card needs to be reinserted.
[PFD1, PFD2, or MFD1]
CARD
2 REM
– Card 2 was removed.
Reinsert card.
The SD card was removed from the bottom card slot of the specified PFD or MFD. The
SD card needs to be reinserted.
[PFD1, PFD2, or MFD1]
CARD 1
ERR
– Card 1 is invalid.
The SD card in the top card slot of the specified PFD or MFD contains invalid data.
[PFD1, PFD2, or MFD1]
CARD 2
ERR
– Card 2 is invalid.
The SD card in the bottom card slot of the specified PFD or MFD contains invalid data.
HDG PRESET MODE
– Magnetic
anomoly detected. HPM is available.
The magnetometer has detected a magnetic anomoly that could affect heading
indications. Heading Preset Mode may be used.
FLIGHT PLAN IMPORT/EXPORT MESSAGES
In some circumstances, some messages may appear in conjunction with others.
Flight Plan Import/Export Results Description
‘Flight plan successfully imported.’ A flight plan file stored on the SD card was successfully imported as a stored flight plan.
‘File contained user waypoints only. User waypoints
imported successfully. No stored flight plan data
was modified.’
The file stored on the SD card did not contain a flight plan, only user waypoints. These waypoints
have been saved to the system user waypoints. No flight plans stored in the system have been
modified.
‘No flight plan files found to import.’ The SD card contains no flight plan data.
‘Flight plan import failed.’ Flight plan data was not successfully imported from the SD card.
‘Flight plan partially imported.’ Some flight plan waypoints were successfully imported from the SD card, however others had errors
and were not imported. A partial stored flight plan now exists in the system.
‘File contained user waypoints only.’ The file stored on the SD card did not contain a flight plan, only user waypoints. One or more of
these waypoints did not import successfully.
‘Too many points. Flight plan truncated.’ The flight plan on the SD card contains more waypoints than the system can support. The flight plan
was imported with as many waypoints as possible.