Garmin G1000H Marine Radio User Manual


  Open as PDF
of 548
 
Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
190-01255-00 Rev. B342
HAZARD AVOIDANCE
HTAWS PAGE
TheMAP-HTAWSPageisspecializedtoshowterrain,obstacle,andpotentialimpactpointdatainrelation
totheaircraft’scurrentaltitude,withoutclutterfromthebasemap.ItistheprincipalpageforviewingHTAWS
information.Aviationdata(airports/heliports,VORs,andotherNAVAIDs)canbedisplayedforreference.Ifan
obstacleandtheprojectedightpathoftheaircraftintersect,thedisplayautomaticallyzoomsintotheclosest
potentialpointofimpactontheHTAWSPage.
Aircraftorientationonthismapisalwaysheadingupunlessthereisnovalidheading.Twoviewsareavailable
relativetothepositionoftheaircraft:the360°defaultdisplayandtheradar-likeARC(120°)display.Maprange
isadjustablewiththeRANGE Knobfrom1to200nm,asindicatedbythemaprangerings(orarcs).
Displaying the HTAWS Page:
1) Turn the large
FMS
Knob to select the Map Page Group.
2) Turn the small
FMS
Knob
to select HTAWS Page.
Changing the HTAWS Page view:
1) Press the
VIEW
Softkey.
2) Press the 360 or ARC Softkey to select the desired view.
Or:
1) Press the MENU Key.
2)
Select ‘View Arc’ or ‘View 360º’ (choice dependent on current state) and press the ENT Key to change the view
Showing/hiding aviation information on the HTAWS Page:
1) Press the MENU Key.
2) Select ‘Show Aviation Data’ or ‘Hide Aviation Data’ (choice dependent on current state) and press the ENT Key.
 previous next