Filter
Top Products
GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
555-231-743
Issue 1
November 2000
Translations and Testing
134Miscellaneous Translations
4. Hang up when finished recording the message.
NOTE:
The system records the sound of the receiver returning to the
station. Press the switchhook with your finger, press , or
hang up gently.
5. After waiting 15 seconds, dial the extension number of the announcement
you just recorded.
6. Listen to the recording. If you need to record the message again, repeat
this procedure. If the message is satisfactory, hang up, and repeat this
procedure to record the other announcements.
To delete a recorded announcement, do the following:
1. Go off-hook at a station, and dial the Announcement FAC _____.
2. Dial the extension number of the announcement you want to delete.
3. Press .
Confirmation tone is heard, and the announcement is deleted.
4. Hang up.
5. Use the change announcements command to delete the announcement
extension.
If your system uses the TN750 or TN750B circuit packs, you must manually save
the announcements recorded on those circuit packs. Use the save
announcements command. If you do not save the announcements, all
announcements recorded since the last save will be lost if the system loses
power, or if the TN750 or TN750B circuit packs are removed from the system.
If your system uses only the TN750C circuit pack, saving the announcements is
not required. The TN750C has on-board memory for all announcements.
Drop
3