Filter
Top Products
GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
555-231-743
Issue 1
November 2000
Translations and Testing
214Switch-to-PMS Link Translations
Use the change system-parameters hospitality command to define whether the
housekeeping staff will use IDs, and to administer the housekeeping status
definitions.
On Page 1, the Number of Housekeeper ID Digits field determines the
length of the housekeeping staff ID numbers. Valid entries are 0 to 6. If set to 0,
housekeeping IDs are not used.
On Page 2, enter the definitions for each room state. The status for each of these
must be coordinated with what is administered in the PMS.
change system-parameters hospitality Page 1 of 3
HOSPITALITY
Message Waiting Configuration: act-nopms
Controlled Restrictions Configuration: act-pms
Housekeeper Information Configuration: act-pms
Number of Housekeeper ID Digits: 0
PMS Log Endpoint:
Journal/Schedule Endpoint:
Client Room Coverage Path Configuration: act-nopms
Default Coverage Path for Client Rooms: 1
Forward PMS Messages to Intuity Lodging? y
PMS LINK PARAMETERS
PMS Endpoint: 7899
PMS Protocol Mode: transparent ASCII mode? y
Seconds before PMS Link Idle Timeout: 20
Milliseconds before PMS Link Acknowledgement Timeout: 500
PMS Link Maximum Retransmissions: 5
PMS Link Maximum Retransmission Requests: 5
Take Down Link for Lost Messages? y
change system-parameters hospitality Page 3 of 3
HOSPITALITY
ROOM STATES
Definition for Rooms in State 1: Occupied/dirty
Definition for Rooms in State 2: Occupied/maid In Room
Definition for Rooms in State 3: Occupied/clean
Definition for Rooms in State 4: Vacant/clean
Definition for Rooms in State 5:
Definition for Rooms in State 6:
HOSPITALITY FEATURES
Suite Check-in? y