Filter
Top Products
GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
555-231-743
Issue 1
November 2000
Translations and Testing
166Switch-to-INTUITY Translations
Administer the TCP/IP Networking (R5)
Use the TCP/IP Administration > Network Addressing command to access the
TCP/IP administration.
NOTE:
If this administration is already complete, verify that the settings are
accurate for your installation.
■ TCP/IP Interface — Use the default eeE_0.
■ Host Name — Enter the UNIX name for the INTUITY system. This name is
case-sensitive.
■ IP Address — Enter the IP address for the INTUITY system. From the
previous examples, use 192.168.1.70 if using a dedicated private link.
■ Subnet Mask — Use the default of 255.255.255.0.
■ Default Gateway Address — This is an optional field. Leave it blank.
Configure the LAN Circuit Card (R4.4)
After adding the TCP/IP administration, press to change the function key
display, then press to select the LAN circuit card configuration. This should be
set to 10BASE-T. After selecting this option, press to save the change. The
circuit card configuration is displayed. Press to exit the display.
Configure the LAN Circuit Card (R5)
After adding the TCP/IP administration, press to return to the INTUITY Main
Menu. Use the TCP/IP Administration > Network Interface Card Set-up
command.
■ Card Type — Set this field to PRO100B.
■ Network Media Type — Set this field to Auto-Detect.
After setting these options, press to save the change.
+-------------------------------------------------------+
+ Network Addressing +
+-------------------------------------------------------+
| TCP/IP Interface: eeE_0 |
| Host Name: map5p |
| IP Address: 192.168.1.70 |
| Subnet Mask: 255.255.255.0 |
| Default Gateway Address: |
+-------------------------------------------------------+
F8
F2
F3
F6
F6
F3