Filter
Top Products
GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
555-231-743
Issue 1
November 2000
Installing the System
12Activating the Systems
Activating the Systems
See the appropriate installation document for information about activating the
switch and the INTUITY system:
■ For CMC installations, see Chapter 1 of
DEFINITY ECS Installation,
Upgrades and Additions for Compact Modular Cabinets.
■ For SCC installations, see Chapter 3 of
DEFINITY ECS Installation and
Test for Single-Carrier Cabinets.
■ For MCC installations, see Chapter 3 of
DEFINITY ECS Installation and
Test for Multi-Carrier Cabinets.
■ For installations with an INTUITY system, see Chapter 4 in the INTUITY
installation documents.
Unless instructed otherwise,
always
activate your system using the default
translation card.
Setting Up the Initial Options
After activating the systems, there are some initial administration options you
must set up. In addition to the procedures given in this section, see the
appropriate installation document for information about setting up the initial
options:
■ For CMC installations, see Chapter 1 of
DEFINITY ECS Installation,
Upgrades and Additions for Compact Modular Cabinets.
■ For SCC installations, see Chapter 3 of
DEFINITY ECS Installation and
Test for Single-Carrier Cabinets.
■ For MCC installations, see Chapter 3 of
DEFINITY ECS Installation and
Test for Multi-Carrier Cabinets.
■ For installations with an INTUITY system, see Chapter 5 in the INTUITY
installation documents.
NOTE:
Before setting any options, ensure that the default translation card is being
used on a GuestWorks or DEFINITY BCS switch. A default translation card
is not used on a DEFINITY ECS or ProLogix switch.
Do the following to set up the initial options:
1. After the switch powers up, log on to the switch using the
craft
login ID
and the crftpw password. Distributors should use the dadmin login ID.