Filter
Top Products
GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
555-231-743
Issue 1
November 2000
Translations and Testing
141Miscellaneous Translations
■ Retries — Enter the number of times (0 to 10) the system will attempt to
send the alert message if the call was unsuccessful.
■ Retry Interval — Enter the amount of time between retries. You may enter a
value from 30 to 60 seconds.
■ Main Number — Enter the LDN for the property, or a number that the user
would call to respond to the crisis alert page. This is an optional field, and
can be up to 15 digits, including one or more # digits at the end of the
number.
■ Pager Numbers and PIN — Enter at least one, and up to three different
pager numbers. Each pager number can be up to 15 digits long. If needed,
enter personal ID numbers (PIN) for each pager number. PINs can also be
up to 15 characters long. For the PIN, the letter p adds a pause interval
before sending the PIN. The characters * and # may also be part of the
PIN.
■ DTMF Duration — Enter a value (from 20 to 2550 msec) for the duration of
the DTMF tones, and the amount of pause between the tones. The default
for each is 100 msec. This value may need to be adjusted depending on
trunking requirements.
Based on the above example, the person with pager number 623-577-1353 will
receive crisis alerts that will display “999 3000 555-3000.”
change system-parameters crisis-alert Page 1 of 1
CRISIS ALERT SYSTEM PARAMETERS
ALERT STATION
Every User Responds? y
ALERT PAGER
Alert Pager? y
Originating Extension: 3000
Crisis Alert Code: 999
Retries: 3
Retry Interval: 60
Main Number: 555-3000
Pager Number Pin Number
1: 623-577-1353 1:
2: 2:
3: 3:
DTMF Duration - Tone (msec): 100 Pause (msec): 100