Filter
Top Products
GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
555-231-743
Issue 1
November 2000
Translations and Testing
169Switch-to-INTUITY Translations
Testing the TCP/IP Link
The following tests can be run from the switch to test the link to the INTUITY:
■ ping node-name
name
board
CCs
[packet-length
YYYY
repeat
ZZZ
],
where
name
is the INTUITY node name;
CCs
is the equipment location of
the C-LAN circuit pack;
YYYY
is the size of the test packet; and
ZZZ
is the
number of times that the test will be repeated. The packet length defaults to
64 bytes, with a maximum of 1500 bytes.
■ ping ip-address
address
board
CCs
[packet-length
YYYY
repeat
ZZZ
],
where
address
is the INTUITY IP address;
CCs
is the equipment location
of the C-LAN circuit pack;
YYYY
is the size of the test packet; and
ZZZ
is
the number of times that the test will be repeated. The packet length
defaults to 64 bytes, with a maximum of 1500 bytes.
■ status processor-channels
X
, where
X
is the ethernet link number.
ping node-name audix board 01B10
PING RESULTS
End-pt Node-name Port Port Type Result Time(ms) Error Code
audix 01B1017 ETH-PT PASS 8
ping ip-address 192.168.1.70 board 01B10
PING RESULTS
End-pt ip Port Port Type Result Time(ms) Error Code
192.168.1.70 01B1017 ETH-PT PASS 8
status processor-channels 1
PROCESSOR-CHANNEL STATUS
Channel Number: 1
Session Layer Status: In Service
Socket Status: Established TCP
Link Number: 1
Link Type: ethernet
Message Buffer Number: 0
Last Failure: Far end sent disconnect message
At: 05/10/99 20:24