Filter
Top Products
GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
555-231-743
Issue 1
November 2000
Installing the System
14Setting Up the Initial Options
8. Verify that the hospitality customer options have been enabled by checking
the display system-parameters customer-options screen. On Page 3,
the following options must be enabled:
■ Hospitality (Basic)
■ Hospitality (G3V3 Enhancements)
These options can be enabled only with the
init
login ID. Contact technical
support or your COE if you do not have permission to make this change.
9. Change the craft password using the change password craft command.
!
CAUTION:
After the craft password is changed, the new password must be
safeguarded to prevent unauthorized administration changes.
This password MUST NOT BE REVEALED to the customer.
10. Save these initial translations. Use the save translation command. Label
the translation card with the current date and switch name.
!
CAUTION:
It is recommended that you save your translations regularly
during the installation process. If a power failure occurs, all
translations since the last save are lost and must be
readministered.