GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
555-231-743
Issue 1
November 2000
Translations and Testing
233Parallel Printer Translations (INTUITY)
Parallel Printer Translations
(INTUITY)
For R4.4, use the Customer/Services Administration > System Management
> UNIX Management > Printer Administration > Install Printer Software
command to set up the parallel printer on the INTUITY system. This command
enables the printer port (lp1) for parallel printer operation.
For R5, use the UNIX Management > Printer Administration command to set
up the parallel printer on the INTUITY system. This command enables the printer
port (lp1) for parallel printer operation. You can select from Install Okidata 320
Printer Software or Install Okidata Laser Printer Software. Use the option that
best matches your printer model.
Customer Logins (Switch)
Customer logins cannot be added using the craft login, but you can change
passwords for existing customer logins (use list login to display the logins). If
customer logins exist, use the following screen to change the passwords to the
switch. The passwords must be three to six characters long using any
combination of 0-9, a-z, and A-Z. You should change only the logins that the
customer requests. Instruct the customer that the logins and passwords must be
kept secure to avoid security issues.
Customer Logins (INTUITY)
Use the Customer/Services Administration > System Management >
Password Administration > Assign/Change Password command to create a
password for the customer. The customer will use the “sa” login. Remind the
customer to change the password as soon as the system is turned over, and to
change it frequently. You can also set the password aging option using the
Customer/Services Administration > System Management > Password
Administration > Assign/Change Password Aging command.
change password staff1 Page 1 of 1
PASSWORD ADMINISTRATION
Password of Login Making Change:
LOGIN BEING CHANGED
Login Name: staff1
LOGIN’S PASSWORD INFORMATION
Login’s Password:
Reenter Login’s Password: