Filter
Top Products
GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
555-231-743
Issue 1
November 2000
Translations and Testing
165Switch-to-INTUITY Translations
TCP/IP Link (INTUITY)
On the INTUITY, you must do the following for the TCP/IP link:
■ Administer the TCP/IP networking
NOTE:
Before you can administer the TCP/IP networking, the TCP/IP
feature must be enabled on the customer features window.
Technical support must dial in and enable TCP/IP if it is not
enabled.
■ Configure the LAN circuit card
■ Select a switch type (R4.4 only)
■ Administer the switch interface
■ Reboot the INTUITY system (R4.4 only).
Administer the TCP/IP Networking (R4.4)
Use the Networking Administration > TCP/IP Administration command to
access the TCP/IP administration.
NOTE:
If this administration is already complete, verify that the settings are
accurate for your installation.
■ UNIX Machine Name — Enter the UNIX name for the INTUITY system.
This name is case-sensitive.
■ IP Address — Enter the IP address for the INTUITY system. From the
previous examples, use 192.168.1.70 if using a dedicated private link.
■ Subnet Mask — Use the default of 255.255.255.0.
■ Default Gateway IP Address — This is an optional field. Leave it
blank.
+-------------------------------------------------+
+ TCP/IP Administration +
+-------------------------------------------------+
| UNIX Machine Name: map5p |
||
| IP Address: 192.168.1.70 |
||
| Subnet Mask: 255.255.255.0 |
||
| Default Gateway IP Address: |
+-------------------------------------------------+