Filter
Top Products
GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
555-231-743
Issue 1
November 2000
Translations and Testing
177Switch-to-INTUITY Translations
X.25 Link (INTUITY)
Checking the Switch Link
Use the Customer/Services Administration > Diagnostics > Switch Interface
Diagnostics command to determine if the link is active. During initial installation,
this screen should show that the link is busied out.
After pressing to change the function key labels, the following function keys
control the status of the link:
■ busies-out the link
■ releases the link from busy-out
■ performs diagnostics on the link.
Select a Switch Type (R4.4 only)
Use the Switch Interface Administration > Switch Selection command to
access the switch selection administration.
■ Country — Enter the country where this system is installed.
■ Switch — Enter Definity.
+------------------------------------------------------------------------------+
+ Diagnose Switch Link +
+------------------------------------------------------------------------------+
| STATUS SWITCH-LINK |
| |
| Type Baud State |
| DCIU 9600 Busied |
| |
| Link Level 2 is Down |
| |
| DCIU switches (In/Out of data transfer) |
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 |
| I |
+------------------------------------------------------------------------------+
F8
F2
F3
F4
+-------------------------------------------------+
+ Switch Selection +
+-------------------------------------------------+
||
||
||
| Country: UNITED STATES |
||
||
||
| Switch: Definity |
||
||
||
+-------------------------------------------------+