Filter
Top Products
GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
555-231-743
Issue 1
November 2000
Installing the System
46Connecting the Hospitality Adjuncts
Switch-to-Call Accounting Link using DCP
Data Modules
This connection is used when the distance between the switch and the call
accounting system is greater than 50 feet (15.2 meters), or when using an
r
system.
Parts List
Co-Resident INTUITY Lodging Call Accounting (Homisco)
■ One digital communications protocol (DCP) port on the switch; the 8400B
data module uses a TN2214 or TN2224 2-wire digital port, and the 7400A
and 7400B data modules use a TN754C 4-wire digital port
■ Standard cross-connect hardware
■ One D8W modular cord
■ One 8400B data module optioned as shown on page 48, a 7400A data
module optioned as shown in Table 4, or a 7400B data module optioned as
shown on page 50
■ One DB9-to-DB25 transition cable when using the 8400B data module
■ One Equinox P/N:210068 DTE 10/10 adapter (DB25 DTE,
comcode 406983155); see “Appendix B — Connector Pinouts”
■ One D6AP modular cord (comcode 102937604).
Xiox or other stand-alone call accounting system
■ One digital communications protocol (DCP) port on the switch; the 8400B
data module uses a TN2214 or TN2224 2-wire digital port, and the 7400A
and 7400B data modules use a TN754C 4-wire digital port
■ Standard cross-connect hardware
■ One D8W modular cord
■ One 8400B data module optioned as shown on page 48, a 7400A data
module optioned as shown in Table 4 on Page 49, or a 7400B data module
optioned as shown on page 50
■ One DB9-to-DB25 transition cable when using the 8400B data module
■ One M25A or M25B cable (or equivalent 25-pin straight-through cable);
see “Appendix A — Parts List” on page 242.