Filter
Top Products
GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
555-231-743
Issue 1
November 2000
Translations and Testing
226Switch-to-PMS Link Translations
Controlled Restrictions Testing
To test Controlled Restrictions, do the following:
1. From the PMS terminal, activate Outward Restriction on the test room.
2. Use the status station XXXX command (where XXXX is the test room
number). The status should appear as follows:
3. Use the list pms-down command to display any PMS messages that may
help you troubleshoot link problems. The meanings of the PMS messages
are found in “Appendix C — List PMS Down Events” on page 245.
4. From the PMS terminal, deactivate Outward Restriction on the test room.
5. Run the status station XXXX command again.
The User Cntrl Restr field should be blank.
6. Use the list pms-down command to display any PMS messages that may
help you troubleshoot link problems. The meanings of the PMS messages
are found in “Appendix C — List PMS Down Events” on page 245.
status station 1005
GENERAL STATUS
Type: 2500 Service State: in-srv/on-hook or disc
Extension: 1005 Download Status: not-applicable
Port: 01B0601 SAC Activated? no
Call Parked? no User Cntrl Restr: outward
Ring Cut Off Act? No Group Cntrl Restr: none
Active Coverage Option: 1 CF Destination Ext:
Message Waiting:
Connected Ports:
ACD STATUS HOSPITALITY STATUS
Grp/Mod Grp/Mod Grp/Mod Grp/Mod Grp/Mod AWU Call At:
/ / / / / User DND: not activated
/ / / / / Group DND: not activated
/ / / / / Room Status: occupied
/////
On ACD Call? no