Filter
Top Products
GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
555-231-743
Issue 1
November 2000
Translations and Testing
157Switch-to-INTUITY Translations
Switch-to-INTUITY Translations
Tab le 11 is a checklist of the translations and tests that must be done to
administer the switch-to-INTUITY link.
Switch-to-INTUITY Messaging Link
There are three ways you can set up the messaging link between the switch and
the INTUITY:
■ TCP/IP signaling (page 158)
■ X.25 signaling (page 174)
■ Mode Code integration (page 181).
This link requires administration on the switch and the INTUITY.
Table 11. Checklist for Switch-to-INTUITY Translations
✔
Description Reference
Switch-to-INTUITY Messaging Link — Depending on the
hardware, use only one of these three configurations:
- TCP/IP signaling
- X.25 signaling
- Mode Code integration
page 158
page 174
page 181
Voice ports (switch) page 183
Hunt groups for the voice ports (switch) page 186
Extensions for guest message retrieval (switch) page 188
Coverage paths to route calls to INTUITY AUDIX (switch) page 189
Voice port extensions, channels, and services (INTUITY) page 190
Services to phone number mapping (INTUITY) page 192
Attendant and administrator passwords (INTUITY) page 193
Test the switch-to-INTUITY voice ports page 194