GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
555-231-743
Issue 1
November 2000
Translations and Testing
168Switch-to-INTUITY Translations
■ TCP Port — Enter the TCP port number (5002 or 6001-6999). This must
match the Interface Channel field of the switch Processor Channel
screen. The default for an INTUITY system is 5002.
Reboot the INTUITY System (R4.4 Only)
You must now reboot the INTUITY system. This is not required on an R5 system.
1. Use the Customer/Services Administration > System Management >
System Control > Shutdown System command to shut down the
INTUITY system.
2. When the system asks for a number of seconds to wait before shutdown,
enter 0. Follow the shutdown instructions to bring the system back up.
3. After bringing the system up, start up the voice system and then continue
with link testing.
NOTE:
If you change any INTUITY system IP addresses on an R4.4 system after
doing this administration, you must reboot the system before the link will
come up.
+-------------------------------------------------------------------------+
+ Switch Link Administration +
+-------------------------------------------------------------------------+
| Switch Link Type: LAN Country: UNITED STATES |
| Extension Length: 3 Switch: DEFINITY OVERLAN |
| Host Switch Number: 1 |
| AUDIX Number: 1 |
| |
|Switch IP Address/ TCP Switch IP Address/ TCP |
|Number Host Name Port Number Host Name Port |
| 1 192.168.1.10 5002 |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+-------------------------------------------------------------------------+