Filter
Top Products
GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
555-231-743
Issue 1
November 2000
Translations and Testing
135Miscellaneous Translations
Use the change system-parameters hospitality command to administer options
associated with recorded announcements. On Page 2, administer the following:
■ Use the Announcement Type field to indicate the type of automatic
wakeup announcement the hotel guest will receive. Allowable entries are
as follows:
NOTE:
One of the following four fields appears depending on what data
is entered in the Announcement Type field.
—The Auxiliary Board for Announcement field appears only
when the external announcement type is used. This indicates the
equipment location of an auxiliary trunk circuit that connects to the
external announcement equipment.
—The Integrated Announcement Extension field appears
only when the integrated announcement type is used. This indi-
cates the wakeup announcement extension when using the inte-
grated announcement circuit pack.
Valid entries Usage
external Applicable when using an announcement adjunct.
If external is used, complete the Auxiliary Board for
Announcement field.
integrated Applicable when using the TN750B or TN750C
announcement circuit packs.
If integrated is used, complete the Integrated
Announcement Extension field. The extension you
enter must be a valid integrated announcement exten-
sion (administered on the Recorded Announcements
screen) or a VDN. If you enter an invalid extension, the
switch displays an error message.
mult-integ Applicable when using the TN750B or TN750C
announcement circuit packs.
If mult-integ is used, complete the Default
Announcement Extension field. The extension you
enter must be a valid integrated announcement exten-
sion (administered on the Recorded Announcements
screen) or a VDN. If you enter an invalid extension, the
switch displays an error message.
voice- synthesis If voice-synthesis is used, complete the Announce-
ment Ports field.
music-on-hold If music-on-hold is used, no other field appears.
silence If silence is used, no other field appears.