Filter
Top Products
Change Craft Password
September 1995 Issue 1
7-9
Alarms will appear in the Alarm Log when power is applied to the system
before all equipment connecting to port circuit packs is installed.
Normally, some alarms will be logged when power is applied to the
system, but should be resolved quickly. If no equipment is connected to
the port circuit packs, alarms associated with these ports can take up to
four hours to log, but will clear automatically after all equipment is installed
and operating correctly.
Change Craft Password
The password for the craft login
must be changed
by the installing technician to
prevent unauthorized administration changes.
!
CAUTION:
After the ‘‘craft’’ password is changed, the new password must be
safeguarded so no unauthorized administration changes can be made.
This password MUST NOT BE REVEALED to the customer or to any
unauthorized person.
Passwords are changed using the Change Password Screen (see Screen 7-2).
To change the ‘‘craft’’ password, perform the following.
1. Verify the screen displays:
command:
2. Type change password craft. Press
ENTER.