Filter
Top Products
Install and Connect the Cabinets
4-34 Issue 1 September 1995
Install Cable Clamps
At the back of the cabinets, on each ground plate, install two cable clamps
using the screws provided (see Figure 4-23). These clamps hold the 25-pair
input/output or cross-connect field cables in place.
Figure 4-23. Location of Cable Clamps
45
2
1
3
Figure Notes:
1. Cable Clamp
2. Cable Slack Manager
3. Switch Cabinet
4. Cabinet Trough for Port Cables
5. Spare Center Troughs