Filter
Top Products
Option Switch Settings
H-4 September 1995 Issue 1
201CR Modem Option Settings
When the 201CR modem is used with a modular trunk data module, set the
options on the modular trunk data module as shown in Table H-4. Options on the
201CR modem are shown in Table H-5. When used for modem pooling, all
factory-furnished options are used except option YD must be selected instead of
option YC and option YS must be selected instead of option YT.
Table H-4. Option Switch Settings on Modular Trunk Data
Module Used With 201CR Modem
Switch Setting
2400 baud ON
SW ON
SIGLS ON
SYNC ON
HDX ON
CN18
All Others OFF