Filter
Top Products
Install Front Plates
Issue 1 September 1995
4-35
Install Front Plates
The front plates provide electromagnetic radiation and radio frequency (RF)
shielding and earthquake protection.
If you do not have a requirement for electromagnetic radiation shielding, radio
frequency shielding, or earthquake protection, use the cabinet clips as
described in this section.
Install Front Plates on Systems with
Earthquake Protection
Refer to Appendix B to install the front plates to help provide earthquake
protection and radiation shielding.
Front plates are used in place of cabinet clips (as described in Appendix B), for
earthquake protection.
Install Cabinet Clip On Systems without
Earthquake Protection
A cabinet clip is required between each cabinet to stabilize the cabinets.
Figure 4-24. Cabinet Clip
At the front of the cabinets, install a cabinet clip (Figure 4-24) between each
cabinet by hooking the clip into the slot of the upper cabinet and snapping the
straight leg of the clip into the slot on the lower cabinet (see Figure 4-25).
1