Filter
Top Products
208BR Modem Option Settings
September 1995 Issue 1
H-9
208BR Modem Option Settings
When the 208BR modem is used with a modular trunk data module, set the
options on the modular trunk data module as shown in Table H-8. Options for the
208BR modem are shown in Table H-9. When used for modem pooling, all
factory-furnished options are used except option YD must be selected instead of
option YC, and option YM must be selected instead of option YN.
Table H-8. Option Switch Settings on Modular Trunk Data
Module Used With 208BR Modem
Switch Setting
4800 baud ON
SW ON
SIGLS ON
SYNC ON
HDX ON
All Others OFF