Filter
Top Products
Save Translations
September 1995 Issue 1
7-15
3. Move the cursor by pressing TAB to move down the screen from field to
field and enter y in the Packet Bus Activated? field to indicate you
have a TN778 circuit pack.
This is the only field needing change on this screen to turn the red lights
off.
4. Press
ENTER when the information is correct.
5. Verify the screen displays:
command successfully completed
command:
Save Translations
The save translation command copies the current system translations onto the
translation card. For standard-reliability systems, one translation card plus one
backup are required. For high or critical-reliability systems, two translation cards
plus two backups are required.
!
CAUTION:
Do not attempt to save translations on the orange-labeled, 10 MB memory
card. Use the white translation card!
The following procedure can be used to save system translations on the original
card(s) and can also can be used to make a backup card or cards:
1. Verify the screen displays:
command:
2. Type save translation and press
ENTER.
3. After several minutes, the screen displays something like this: