Filter
Top Products
Installing the 9400-Series Telephones
E-10 September 1995 Issue 1
■ The button lights on your telephone go on (and, if the terminal has a
display, all the display segments fill in):
— On the 9403, all the lights go on together.
— On the 9410, the lights go on in two groups, and the display
fills in all the segments.
— On the 9434, the lights go on in four groups, and the display
fills in all the segments.
6. Release TEST to end the test.
■ Lights return to pretest state.
■ Green light next to TEST goes off.
NOTE:
You can test the tone ringer on your telephone by pressing either side of
the volume control button when the handset is on-hook and the speaker is
not in use.
Button Labels
The following buttons appear on the 9400-series telephones. The button labels in
this table are provided in English and French.
Table E-3. Button Labels for 9400-Series Telephones.
English Button Labels French Button Labels
Volume
Shift/Feature 2nd F
Test Test
Mute Secret
Speaker
Transfer Trans
Conf Conf
Drop Lib
Hold Attente