Filter
Top Products
Option Switch Settings
H-2 September 1995 Issue 1
connected through a modular processor data module serving as the interface
link. The option settings for the modular processor data module (MPDM) in this
application are shown in Table H-1.
Modem Pooling (Combined) Option
Settings
Combined Modem Pooling requires option switch settings on different modems
and modular trunk data modules. The following paragraphs describe the option
settings for each application.
103JR Modem Option Settings
When the 103JR modem is used with a modular trunk data module, set the
options on the modular trunk data module as shown in Table H-2. Options for the
103JR modem are shown in Table H-3. When used for modem pooling, all
factory-furnished options on the modem are used.
Table H-1. Option Switch Settings on the Modular Processor
Data Module for the Distributed Communications
System
Switch Setting
9600 BAUD ON
SYNC ON
INT ON
KYBD ON
AANS ON
All Others OFF
Table H-2. Option Switch Settings on the Modular Trunk Data
Module Used With 103JR Modem
Switch Setting
300 baud ON
SW ON
SIGLS ON
CN25 ON
All Others OFF