Filter
Top Products
Test Telephones and Other Equipment
10-16 Issue 1 September 1995
3. Verify the extension number of the calling telephone is displayed on the
display of the called telephone. The extension must be correct.
4. Hang up both telephones.
5. Call the Basic Rate Interface (BRI) test telephone from the other
telephone. The Basic Rate Interface (BRI) test telephone rings.
6. Verify the name and extension of the called Basic Rate Interface (BRI) test
telephone is correct as displayed on the calling telephone.
7. Hang up both telephones.
Procedure—Checking the Service Profile
Identifier (SPID)
This test requires a display telephone at the test telephone station.
1. Use appropriate procedures to display the Service Profile Identifier (SPID)
on the test telephone. Procedures differ depending on the model of
telephone being used. The Service Profile Identifier (SPID) must be
correct.