Filter
Top Products
Issue 1 September 1995 10-1
10
Test Telephones and Other
Equipment
This chapter describes how to test the telephones and other equipment. The
following tests are included in this chapter:
1. Make test calls (single-cabinet switch)
2. Make test calls (two-cabinet switch)
3. Make test calls (three-cabinet switch)
4. Test the attendant console
5. Test the selector console
6. Test External Ringing
7. Test Queue Warning Indicator
8. Test Integrated Announcement
9. Test Music-on-Hold
10. Test Emergency Transfer
11. Test remote access interface (known as Initialization and Administration
System (INADS))
12. Test Basic Rate Interface (BRI)
NOTE:
The tests in this chapter are performed after the equipment has been wired
to the switch and after the customer’s data for that equipment has been
administered.
For easier reference, installation steps and test steps are grouped in separate
chapters. It may be more efficient to install each hardware component,
administer it, and then test it before going on to install another component. As an
example, install the attendant console using the procedures in
Chapter 9, "Install