Filter
Top Products
DEFINITY AUDIX System Power Procedures
C-4 Issue 1 September 1995
2. Hold Boot/Shutdown button in until the display indicates the message,
BTEST, steady on.
3. Release Boot/Shutdown button.
NOTE:
DEFINITY AUDIX System takes approximately five minutes to power
up. The following occurs during power up:
■ Display indicates the message, BTEST, steady on and red
light emitting diode (LED) is steady on.
■ About 30 seconds into power up, the display indicates the
message, BOOT, and the red light emitting diode (LED) goes
off.
■ The display has the following sequence of steady on
messages:
— OSINIT
— OS
— AINIT
— ADX
■ The DEFINITY AUDIX System is now powered up.
NOTE:
When DEFINITY AUDIX System is in the active state,
the display indicates a steady on message, ADX, and
the red light emitting diode (LED) is off.