Filter
Top Products
Set Date and Time
September 1995 Issue 1
7-11
Set Date and Time
The system date and time are set using the Set Date and Time Screen (see
Screen 7-3). This screen is displayed on the terminal screen and is changed with
the terminal keyboard. To set the system time and date, perform the following:
1. Verify the screen displays:
command:
2. Type set time. Then press
ENTER.
3. Verify the screen displays Set Date and Time Screen (shown below).
Cursor is positioned on Day of the Week: field.
Screen 7-3. Typical Date and Time Screen
4. Type
day of week
in English (Sunday through Saturday) and press TAB to
move to next field. See Table 7-2 for English day of the week names.
set time Page 1 of 1
DATE AND TIME
DATE
Day of the Week: _________ Month: __________
Day of the Month: __ Year: ____
TIME
Hour: __ Second: xx
Minute: __