Filter
Top Products
Index
Issue 1 September 1995 IN-7
power up
AC-powered switch, procedure
, 7-3
AUDIX procedure
, C-1
DC-powered switch, procedure
, 7-3
PPN cabinet
installing
, 4-2
printer
475 switch settings
, H-21
572 option settings
, H-30
connecting to G3MT
, 6-2
journal option settings
, H-21
option settings
, H-20
parallel
, 6-2
serial
, 6-2
processor interface circuit pack
AUDIX connections
, H-36
switch settings
, H-2
processor port network, duplication
, 1-1
protection
earthquake
, B-1
electromagnetic
, B-4
provisioning plan
, 2-9
Q
queue warning indicator, test procedure, 10-10
R
REBOOT PERFORMED, 7-4
recorded announcement, test procedure
, 10-12
red lights
what to do about
, 7-8
refresh spe command
, 8-13
reliability
critical
, 1-1, 1-2
testing systems
, 8-11, 8-12, 8-17
high
, 1-1, 1-2
testing systems
, 8-11, 8-12
overview
, 1-1
standard
, 1-1, 1-2
remote access, test procedure
, 10-14
Report Scheduler, system printer
, H-21
required hardware
by country
, D-1–D-19
requirements
country hardware for grounding
, A-1
protective grounding
, A-1
reset system interchange command
, 8-13
RF shielding
, 4-35, B-4
ringing
external, test procedure
, 10-9
night, test procedure
, 10-9
routing cables
, 5-3
Russia
country code
, 7-8
required hardware
, D-14
RX connector
, 4-19
S
Saudi Arabia
country code
, 7-8
required hardware
, D-15
save translations
, 7-15
screens
G3MT introduction
, 7-4
screws, thread-forming
, B-2, B-4
selector console, test procedure
, 10-9
serial printers
, 6-2
set expansion-link command
, 8-18
set tone-clock command
, 8-17
setting
bit rate
, H-41, H-42
line impedance
, H-41, H-42
setting date and time, procedure
, 7-11
shadow link
test procedure
, 8-11
shielding, electromagnetic
, 4-35, B-4
Shockwatch
trademark information
, xvii
signaling leads, DC power
, H-37
signaling, bit-oriented
, H-41
Singapore
country code
, 7-8
required hardware
, D-16
single-point ground terminal
, A-2
site planning and preparation
overview
, 1-3
procedure
, 2-1
slack manager
floor plan including
, 2-2
Slovakia
required hardware
, D-6
SMDR
, H-20
option settings
, H-34
output receiving device
, H-35
printer
, H-30
Spain
country code
, 7-8
required hardware
, D-16
SPID
test procedure for
, 10-16
stabilizing cabinets
, 4-35
for earthquakes
, B-4, F-1
standard reliability
, 1-1, 1-2
standby power
, 4-14
Station Message Detail Recording (SMDR)
, H-20
status system all-cabinets
command
, 8-1, 8-12, 8-17, 8-18