Filter
Top Products
Activate the System
7-16 September 1995 Issue 1
Screen 7-5. Typical Save Translation Screen
4. Verify a 0 is displayed in the Error Code column for each switch
processing element in the system. A 0 indicates the save translation was
successfully completed for the translation card. If a 0 did not appear, the
save translation did not complete. Record the ‘‘error code number’’ and
the ‘‘error message’’ and notify your AT&T representative.
5. Remove the original translation card(s) from the TN777B(s) and replace it
or them with backup card(s).
6. Repeat Steps 1 through 4 for the backup card(s).
7. Remove the backup translation card(s) from the TN777B and replace it or
them with the original translation card(s).
8. Label the backup card(s) with the date and time of the backup. A special
notation should be put on the cards to clearly distinguish them from other
such devices.
9. Store the backup in a secure place.
save translation SPE A
SAVE TRANSLATION
Processor Command Completion Status Error Code
SPE_A Success 0
SPE_B Success 0
Command successfully completed
command: