Filter
Top Products
Locate and Lay Out the Equipment Room
Issue 1 September 1995
2-5
* Electric drill and drill bits are required for earthquake mounting.
† Since U.S./English fasteners are used, U.S./English tools are required unless an exact match can
be found among metric tools.
‡ Required when installing an AC powered switch.
Table 2-1. Tools and Test Equipment Inventory
Tasks Equipment Required
Recommended
Type
Recommended
Types for Europe
Unpacking
Cabinet
Tin Snips
Utility Knife
Adjustable Wrench 6- or 8-inch
Installing
Cabinet
*
Electric Drill Impact type
Masonry Bit 1/2-inch
Drill Bit
(for Computer Floors only)
5/8-inch
Drift Punch Length as required to
reach from computer
floor to concrete floor
Chalk Line
Rule 30-inch
Adjustable Wrench 6- or 8-inch
Ratchet 1/2-inch 1/2-inch
†
Sockets 5/16-, 1/2-, and 3/4-
inch
5/16-, 1/2-, and 3/4-
inch
†
Nut driver 1/4-inch 1/4-inch
†
Screwdriver 8-inch flat blade
Allen Wrench
‡
1/8-inch
Checking
Commercial Power
Digital Multimeter KS-20599
Circuit Pack
Voltage Check
Voltage Tester TN2036 (optional)
Initializing Switch Generic 3 Management Terminal 715 Management
Terminal
Installing cables
and telephones
Diagonal cutters
Phillips screwdriver
Electric drill for installing
information outlets
Impact tool for cross-connect
hardware
Test (telephone) set