Filter
Top Products
401
400V class
(2) The following functions can be used with the inverter produced in June 2009 or later.
Check the serial number printed on the rating plate or on package.
Inverter Model
Label on Product Package
Identification Symbol
Lower Third and
Second Number of TC
Number on Rating Plate
SERIAL (Upper Second
Numbers of SERIAL)
FR-F740-00023-NA
Without G5 A7
<G> G7 D7
FR-F740-00038 to 00126-NA
Without G5 B7
<G> G7 D7
FR-F740-00170 to 00380-NA
Without G5 W7
<G> G7 E7
FR-F740-00470-NA
Without G5 Y7
<G> G7 H7
FR-F740-00620-NA
Without G5 Z7
<G> G7 H7
FR-F740-00770 to 01160-NA
Without G5 U7
<G> G7 E7
FR-F740-01800-NA
Without G5 P7
<G> G7 C7
FR-F740-02160/02600-NA
Without G5 P7
<G> G7 D7
FR-F740-03250/03610-NA
Without G5 Q7
<G> G7 D7
FR-F740-04320/04810-NA
Without G5 P7
<G> G7 D7
FR-F740-05470-NA
Without G5 K7
<G> G7 D7
FR-F740-06100-NA
Without G5 L7
<G> G7 D7
FR-F740-06830-NA
Without G5 K7
<G> G7 D7
FR-F740-07700/08660-NA
Without G5 M7
<G> G7 B7
FR-F740-09620 to 12120-NA
Without G5 L7
<G> G7 B7
Item Changed Functions
Added parameter setting values
Pr. 29 Acceleration/deceleration pattern selection setting value "6"
Pr. 30 Regenerative function selection setting value "10", "11", "20", "21"
Pr. 59 Remote function selection setting value "11", "12", "13"
Pr.128 PID action selection setting value "110", "111", "120", "121"
Pr.167 Output current detection operation selection setting value "10", "11"
Pr. 178 to Pr. 189 Input terminal function selection setting value "70", "71", "72"
Pr. 190 to Pr. 196 Input terminal function selection setting value "48", "79", "85", "148",
"179", "185"
Pr. 261 Power failure stop selection setting value "21", "22"
Added parameters
Pr.522 Output stop frequency
Pr.553 PID deviation limit
Pr.554 PID signal operation selection
Pr.653 Speed smoothing control
Pr.654 Speed smoothing cutoff frequency
Pr.799 Pulse increment setting for output power
C42 (Pr.934) PID display bias coefficient
C43 (Pr.934) PID display bias analog value
C44 (Pr.935) PID display gain coefficient
C45 (Pr.935) PID display gain analog value
Changed parameter setting ranges
Pr.153 Zero current detection time setting range "0 to 1s" →
"0 to 10s"