Filter
Top Products
59
Operation panel (FR-DU07)
4
PARAMETERS
4.1.2 Basic operation (factory setting)
At powering ON (External operation mode)
PU operation mode
(output frequency monitor)
Parameter setting mode
PU Jog operation mode
Output current monitor
Output voltage monitor
Displays the present
setting
Value change
Value change
Parameter write is completed!!
Parameter and a setting value
flicker alternately.
Parameter clear Parameter
all clear
Fault clear
Parameter copyInitial value change list
(Example)
(Example)
Frequency setting has been
written and completed!!
and frequency flicker.
[Operation for displaying faults history]
Past eight faults can be displayed.
(The latest fault is ended by ".".)
When no fault history exists, is displayed.
Operation mode switchover
Parameter settingFaults history
Monitor/frequency setting
Automatic
parameter setting
While a fault is displayed:
The display shifts as follow by pressing : Output frequency at the fault
Output current Output voltage Energization time.
(After Energization time, it goes back to a fault display.)
Pressing the setting dial shows the fault is at which number of the history.
(Refer to page 328)
(Refer to page 61)