Filter
Top Products
402
(3) The following functions and two plug-in options can be used with the inverter produced in June 2010 or later.
Check the serial number printed on the rating plate or on package.
(4) BACnet MS/TP protocol and the following functions can be used with the inverter produced in August 2010 or
later. Check the serial number printed on the rating plate or on package.
Item Changed Functions
Added parameter setting values
Pr. 30 Regenerative function selection setting value "100, 101, 120, 121"
Pr. 54 CA terminal function selection and 158 AM terminal function selection setting value
"70"
Pr. 128 PID action selection setting value "70 to 101"
Pr. 178 to Pr. 189 (input terminal function selection) setting value "50, 51, 77 and 78"
Pr. 190 to Pr. 196 (output terminal function selection)
setting value "49 to 54, 67, 149 to 154,
167"
Pr.573 4mA input check selection setting range "2, 3, 4"
Added parameters
Pr. 147, Pr. 296, Pr. 297, Pr. 414, Pr. 415, Pr. 498, Pr. 502, Pr. 505 to Pr. 515 , Pr. 665, Pr. 753
to Pr. 769, Pr. 774 to Pr. 779, Pr. 826 to Pr. 865, Pr. 870, Pr. 997, Pr. 999, Pr.CH, AUTO,
Changed parameter setting ranges
Pr. 263 Subtraction starting frequency setting range "0 to 120Hz, 9999" to "0 to 400Hz,
9999"
Pr. 885 Regeneration avoidance compensation frequency limit value setting range "0 to
10Hz, 9999" to "0 to 30Hz, 9999"
Mitsubishi inverter protocol
(computer link communication)
⋅ Multi-command
⋅ Model information monitor
⋅ Cumulative power (32-bit) for a special monitor
Modbus-RTU communication
⋅ Model information monitor
⋅ Cumulative power (32-bit) for a real time monitor
Error message
⋅ LOCd Password locked
⋅ E.2 Option fault
⋅ E.OP2 Communication option fault
⋅ E.PCH Pre-charge stop
⋅ E.LCI 4mA input fault
Item Changed Functions
Added parameter setting values
Pr. 52 DU/PU main display data selection setting value "67, 81 to 86"
Pr. 54 CA terminal function selection setting value "67, 85"
Pr. 158 AM terminal function selection setting value "67, 86"
Pr. 190 to Pr. 196 (output terminal function selection)
setting value "82 and 182"
Pr. 331 RS-485 communication station number setting range "0 to 127"
Pr. 332 RS-485 communication speed setting range "768"
Pr. 549 Protocol selection setting range "2"
Pr. 774 to Pr. 776 PU/DU monitor selection 1 to 3 setting range "67, 81 to 86"
Added parameters Pr. 390, Pr. 726 to Pr. 729