Filter
Top Products
Appendix G - Configuring Direct Connections to the Collaboration Server
Polycom®, Inc. 974
Collaboration Server (RMX) 4000
2 Connect the power cable and power the Collaboration Server On.
3 Start the Collaboration Server Web Client application on the workstation, by entering the factory
setting Management IP address in the browser’s address line and pressing Enter.
4 In the Collaboration Server Web Client Login screen, enter the default Username (POLYCOM) and
Password (POLYCOM) and click the Login button.
The Fast Configuration Wizard starts.
For more information about First-time Power-up and the Fast Configuration Wizard see Procedure 1:
First-time Power-up in the Polycom RealPresence Collaboration Server (RMX)
1500/1800/2000/4000 Getting Started Guide.
5 Enter the following parameters using the information supplied by your network administrator:
Control Unit IP Address
Shelf Management IP Address
Control Unit Subnet Mask
Default Router IP Address
6 Click the Save & Close button.
The system prompts you to sign in with the new Control Unit IP Address.
7 Disconnect the LAN cable between the workstation and the LAN 2 Port on the Collaboration
Server’s back panel.