Filter
Top Products
System Configuration Flags
Polycom®, Inc. 795
PSTN_RINGING_DURATION_SEC
ONDS
If there is a slow response from the ISDN switch, the PSTN dial-out ringing
duration (in seconds) is used by the Collaboration Server to disconnect the
call.
Default: 45
QOS_IP_AUDIO Used to select the priority of audio packets when DiffServ is the is the
selected method for packet priority encoding.
Default: 0x31
QOS_IP_VIDEO Used to select the priority of video packets when DiffServ is the is the
selected method for packet priority encoding.
Default: 0x31
QOS_MANAGEMENT_NETWORK Enter the DSCP value for the RMX Management Network.
Default: 0x10
Range: 0x00 - 0x3F
REDUCE_CAPS_FOR_REDCOM_
SIP
To accommodate deployments where some devices have limits on the size
of the SDP payload in SIP messages (such as LSCs from Redcom running
older software versions), when the flag value = YES, the SDP size is less
than 2kb and includes only one audio and one video media line.
Default: NO
REDIAL_INTERVAL_IN_SECONDS Enter the number of seconds that the Collaboration Server should wait
before successive re dialing attempts.
Range: 0-30 (Default: 10)
REDUCE_CAPS_FOR_REDCOM_
SIP
To accommodate Redcom’s SDP size limit, when the flag value = YES, the
SDP size is less than 2kb and includes only one audio and one video media
line.
Default: NO
REJECT_INCORRECT_PRECEDE
NCE_DOMAIN_NAME
When set to YES, when the Precedence Domain of a SIP dial-in call does
not match the Precedence Domain of the RMX, the call is rejected. For
more information, see MLPP (Multi Level Precedence and Preemption).
Possible values: YES/NO
Default: No
REMOVE_EP_FROM_LAYOUT_O
N_NO_VIDEO_TIMER
Enables the removal of empty video cells from a Video Layout.
REMOVE_H323_EPC_CAP_TO_N
ON_POLYCOM_VENDOR
Used to disable EPC protocol. Use of Polycom’s proprietary protocol, High
Profile, EPC, may result in interoperability issues when used with other
vendors’ endpoints.
Possible values: YES / NO
Default: NO
Manually Added, Modified, Deleted System Flags
Flag Description