Filter
Top Products
Appendix I - Polycom Open Collaboration Network (POCN)
Polycom®, Inc. 1034
In Prefer TIP mode, it is pre-requisite that the CTS and CUCM versions support H.264 base profile
content without restrictions and that the CTS version be 1.9.1 or higher and that CUCM version be
version 9.0 or higher.
Procedure 5: Configuring an Ad Hoc Entry Queue on the Collaboration Server if
DMA is not used
1 Create or select the Entry Queue as described in Entry Queues.
2 In the New Entry Queue or Entry Queue Properties dialog box, ensure that Ad Hoc is selected.
3 Ensure that the Entry Queue is designated as the Transit Entry Queue as described in Setting a
Transit Entry Queue.
Procedure 6: Configuring a Meeting Room on the Collaboration Server
The Profile for the Meeting Room must be TIP enabled as described in Procedure 4.
For more information see Creating a New Meeting Room.
Procedure 7: Configuring Participant Properties for dial out calls
Participant Properties must be configured to ensure that defined participants inherit their TIP settings from
the Profile assigned to the Meeting Room.