Filter
Top Products
Conference and Participant Monitoring
Polycom®, Inc. 406
Conferences – Monitoring Information
Field Description
Display Name
Displays conference name and type of conference:
• – AVC Conference running in CP mode.
• – AVC Conference running in Video Switching mode.
• – The AVC conference has been secured using the *71 DTMF code. For details,
see Secured Conference Monitoring (AVC CP Only).
• – AVC Operator Conference
• – Media Relay - SVC-based Conference.
• – Mixed CP and SVC Conference
Status Displays the status of the ongoing conference.
If there is no problem with the participant’s connection no indication is displayed.
If one of the following statuses occur, the appropriate indication is displayed,
proceeded by a warning icon ( ).
•Audio – There is a problem with the participant’s audio.
•Empty – No participants are connected.
• Faulty Connection – Participants are connected, but the connection is problematic.
• Not Full – Not all the defined participants are connected.
• Partially Connected – The connection process is not yet complete; the video
channel has not been connected.
• Single Participant – Only one participant is connected.
•Video – There is a problem with the participant’s video.
• Content Resource Deficiency – Content will not be sent to legacy endpoints.
• Awaiting Operator – A participant has requested operator assistance.
ID The Conference ID assigned to the conference.
Start Time Conference start time.
End Time The time the conference is expected to end.
Dial in Number(1) The Conference dial in number for ISDN/PSTN participants.
SIP Registration The status of registration with the SIP server:
• Not configured - Registration with the SIP Server was not enabled in the
Conference Profile assigned to this conferencing Entity.
In Multiple Networks configuration, If one service is not configured while others are
configured and registered, the status reflects the registration with the configured
Network Services. The registration status with each SIP Server can be viewed in
the Properties - Network Services dialog box of each conferencing entity.
•Failed - Registration with the SIP Server failed. This may be due to incorrect
definition of the SIP server in the IP Network Service, or the SIP server may be
down, or any other reason the affects the connection between the MCU or the SIP
Server to the network.
•Registered - The conferencing entity is registered with the SIP Server.
• Partially Registered - This status is available only in Multiple Networks
configuration, when the conferencing entity failed to register to all the required
Network Services if more than one Network Service was selected.