Filter
Top Products
Defining AVC-Based Conference Profiles
Polycom®, Inc. 45
LPR When selected (default for CP conferences), Lost Packet Recovery creates
additional packets that contain recovery information used to reconstruct packets
that are lost during transmission.
The LPR check box is automatically cleared if Video Switching is selected as
the Conferencing Mode, but can be selected if required.
For more information, see Packet Loss Compensation - LPR and DBA.
Auto Terminate When selected (default), the conference automatically ends when the
termination conditions are met:
• Before First Joins — No participant has connected to a conference during
the n minutes after it started. Default idle time is 10 minutes.
• At the End - After Last Quits — All the participants disconnected from the
conference, and the conference is idle (empty) for the predefined time period.
Default idle time is 1 minute.
• At the End - When Last Participant Remains — Only one participant is
connected to the conference for the predefined time period (excluding the
recording link which is not considered a participant when this option is
selected). This option should be selected when defining a Profile that will be
used for Gateway Calls, and wishing to ensure the call is automatically
terminated when only one participant is connected. Default idle time is 1
minute.
Note: The selection of this option is automatically cleared and disabled when
the Operator Conference option is selected. The Operator conference cannot
automatically end unless it is terminated by the Collaboration Server User.
Auto Redialing The Auto Redialing option instructs the Collaboration Server to automatically
redial H.323 and SIP participants that have been abnormally disconnected from
the conference.
• Auto Redialing is disabled by default.
• Auto Redialing can be enabled or disabled during an ongoing conference
using the Conference Properties – Advanced dialog box.
• The Collaboration Server will not redial an endpoint that has been
disconnected from the conference by the participant.
• The Collaboration Server will not redial an endpoint that has been
disconnected or deleted from the conference by an operator or administrator.
Exclusive Content Mode Select this option to limit the Content broadcasting to one participant, preventing
other participants from interrupting the Content broadcasting while it is active.
New AVC CP Profile - Advanced Parameters
Field/Option Description