Polycom 1500/1800/2000/4000 Life Jacket User Manual


  Open as PDF
of 1101
 
Start a Conference
Polycom, Inc. 373
ID Enter the unique-per-MCU conference ID. If left blank, the MCU automatically assigns
a number once the conference is launched.
This ID must be communicated to conference participants to enable them to dial in to
the conference.
Note: If setting the Conference ID to the digits that are used for MCU prefix in
Gatekeeper (for example gatekeeper prefix is set to 10 and the conference ID is 1001),
the system will not be able to dial to the destination conference as the prefix digits are
truncated from the conference ID, preventing the system from locating it.
Note: If SIP Factories are used do not use the number 7001 as an ID. 7001 is the
default SIP Factory ID.
Conference Password Enter a password to be used by participants to access the conference. If left blank, no
password is assigned to the conference.
This password is valid only in conferences that are configured to prompt for a
conference password.
This field is numeric and has a default length of 4 characters. The administrator can
modify it in the Setup >System Configuration settings. For more information, see
System Configuration Flags.
The Collaboration Server can be configured to automatically generate conference (and
chairperson) passwords when these fields are left blank. For more information, see
Automatic Password Generation Flags.
Chairperson Password Enter a password to be used by the Collaboration Server to identify the Chairperson
and grant him/her additional privileges. If left blank, no chairperson password is
assigned to the conference. This password is valid only in conferences that are
configured to prompt for a chairperson password.
This field is numeric and has a default length of 4 characters. The administrator can
modify it in the Setup > System Configuration settings. For more information, see
System Configuration Flags.
The RealPresence Collaboration Server can be configured to automatically generate
chairperson (and conference) passwords when these fields are left blank. For more
information, see Automatic Password Generation Flags.
Reserve Resources for
Video Participants
(Collaboration Server
1500/2000/4000 only)
Enter the number of video participants for which the system must reserve resources.
Default: 0 participants.
Maximum:
x Mode: 60 participants (Double card assembly)
x Mode: 30 participants (Single card assembly)
Reserve Resources for
Audio Participants
(Collaboration Server
1500/2000/4000 only)
Enter the number of audio participants for which the system must reserve resources.
Voice resources must be allocated in the Video/Voice Port Allocation dialog box.
Default: 0 participants.
Maximum:
x Mode: 720 participants (Double card assembly, with all ports are set to Audio
Only).
x Mode: 360 participants (Single card assembly, with all ports are set to Audio Only).
New Conference - General tab parameters
Field Description