Filter
Top Products
System Configuration Flags
Polycom®, Inc. 791
MANAGE_TELEPRESENCE_ROO
M_SWITCH_LAYOUTS
Determines whether the MLA or the RMX controls the Room Switch
Telepresence Layouts.
• When set to NO, the RMX does not manage Telepresence Room Switch
Layouts and they continue to be managed by the MLA.
• When set to YES, the RMX manages Telepresence Room Switch
Layouts.
Default: NO
Range: YES / NO
Note: System re-start is not required for this flag’s settings to take effect.
For more information see Room Switch Telepresence Layouts.
MAX_ALLOWED_RTV_HD_FRAM
E_RATE
Defines the threshold Frame Rate (fps) in which RTV Video Protocol
initiates HD resolutions.
Flag values are as follows:
Range: 0-30 (fps)
Default: 0 (fps) - Implements any Frame Rate based on Lync RTV Client
capabilities
MAX_RTV_RESOLUTION Enables you to override the Collaboration Server resolution selection and
limit it to a lower resolution, hence minimizing the resource usage to 1 or
1.5 video resources per call instead of 3 resources. Possible flag values
are:
AUTO (default), QCIF, CIF, VGA or HD720.
MAX_MS_SVC_RESOLUTION Used to minimizing the resource usage by overriding the default resolution
selection and limiting it to a lower resolution.
Range: AUTO, CIF, VGA, HD720, HD1080
Default: AUTO
The MAX_MS_SVC_RESOLUTION System Flag operates independently
from the MAX_RTV_RESOLUTION System Flag allowing differing
maximum resolutions to be selected for the MS SVC and RTV protocols.
MAX_TRACE_LEVEL This flag indicates the debugging level for system support.
Possible values:
TRACE = t
DEBUG = d
INFO_NORMAL = n
INFO_HIGH = i
WARN = w
ERROR = e
FATAL = f
OFF = o
Default: n
Manually Added, Modified, Deleted System Flags
Flag Description