Filter
Top Products
Defining AVC-Based Conference Profiles
Polycom®, Inc. 92
3 Define the New Profile - General parameters:
New AVC VSW Profile - General Parameters
Field/Option Description
Display Name Enter a unique Profile name, as follows:
•
English text uses ASCII encoding and can contain the most characters (length
varies according to the field).
• European and Latin text length is approximately half the length of the maximum.
• Asian text length is approximately one third of the length of the maximum.
It is recommended to use a name that includes the Profile type, such as Weekly
Video Switching conference.
Note: This field is displayed in all tabs.
Line Rate Select the conference bit rate. The line rate
represents the combined video, audio
and Content rate
.
When defining a VSW profile, select a line rate that all connecting participants can
use. Participants that their endpoint or network that do not support this line rate
cannot connect to the conference or will connect as Audio Only (if resources were
designated as Voice ports).
If a high definition resolution will be selected for the conference video, make sure
that the selected line rate is higher than the minimum line rate threshold defined in
the flag HD_THRESHOLD_BITRATE for Video Switching conferences.
The default setting is 384 Kbps.
Note: This field is displayed in all tabs.
Conferencing Mode Select VSW (Video Switching) to define a VSW conference Profile.
Note: This field is displayed in all tabs.
Routing Name Enter the Profile name using ASCII characters set.
The Routing Name can be defined by the user or automatically generated by the
system if no Routing Name is entered as follows:
• If an all ASCII text is entered in Display Name, it is used also as the Routing
Name.
• If any combination of Unicode and ASCII text (or full Unicode text) is entered in
Display Name, the ID (such as Conference ID) is used as the Routing Name.