Polycom 1500/1800/2000/4000 Life Jacket User Manual


  Open as PDF
of 1101
 
Defining AVC-Based Conference Profiles
Polycom®, Inc. 56
Same Layout
(CP only)
Select this option to force the selected layout on all participants in a conference.
Displays the same video stream to all participants and personal selection of the
video layout is disabled. In addition, if participants are forced to a video layout
window, they can see themselves.
Lecture View
Switching
Select this option to enable automatic switching of participants on the Lecturer’s
screen when Lecture Mode is enabled for the conference.
The automatic switching is enabled when the number of participants exceeds the
number of video windows displayed on the Lecturer’s screen.
Note: Lecture Mode is enabled in the Conference Properties – Participants tab.
For more information, see Lecture Mode.
Telepresence Mode
(CP only)
Select the Telepresence Mode from the drop-down menu:
•Off - Normal conference video is sent by the Collaboration Server.
•Auto (Default) - If any ITP (Immersive Telepresence) endpoints are detected,
ITP features are applied to the conference video for all participants.
When Auto is selected, the ITP features are dynamic. If all ITP endpoints
disconnect from the conference, normal conference video is resumed for all
participants. ITP features are resumed for all participants should an ITP
endpoint re-connects to the conference.
•On - ITP features are applied to the conference video for all participants
regardless of whether there are ITP endpoints connected or not.
Notes:
This field is enabled only if the Collaboration Server system is licensed for
Telepresence Mode.
Telepresence Mode is unavailable in Video Switching conferences.
Telepresence Mode is not supported by Collaboration Server (RMX) 1800-0.
Telepresence Layout
Mode
(CP only)
The Telepresence Layout Mode drop-down menu enables VNOC operators and
Polycom Multi Layout Applications to retrieve Telepresence Layout Mode
information from the Collaboration Server.
The following modes can be selected:
•Manual
Continuous Presence (MLA) - Room Continuous Presence (Default)
Speaker Priority For more information see Speaker Priority in CP Video
Layouts.
Room Switch - Voice Activated Room Switching. For more information see
Room Switch Telepresence Layouts.
Note: This field is enabled only if the Collaboration Server system is licensed for
Telepresence Mode.
Auto Scan Interval(s)
(CP only)
Select the time interval, 5 - 300 seconds, that Auto Scan uses to cycle the display
of participants that are not in the conference layout in the selected cell.
Auto Scan is often used in conjunction with Customized Polling which allows the
cyclic display to be set to a predefined order for a predefined time period.
New AVC CP Profile - Video Settings Parameters
Field/Option Description