Filter
Top Products
System Configuration Flags
Polycom®, Inc. 769
IVR_MESSAGE_VOLUME The volume of IVR messages varies according to the value of this flag.
Possible value range: 0-10 (Default: 6).
0 – disables playing the IVR messages
1 – lowest volume
10 – highest volume
Notes:
• It is not recommended to disable IVR messages by setting the flag value
to 0.
• System reset is not required for flag changes to take effect.
IVR_MUSIC_VOLUME The volume of the IVR music played when a single participant is connected
to the conference varies according to the value of this flag.
Possible value range: 0-10 (Default: 5).
0 – disables playing the music
1 – lowest volume
10 – highest volume
Note: System reset is not required for flag changes to take effect.
IVR_ROLL_CALL_VOLUME The volume of the Roll Call varies according to the value of this flag.
Possible value range: 0-10 (Default: 6).
0 – disables playing the Roll Call
1 – lowest volume
10 – highest volume
Note:
• It is not recommended to disable the Roll Call by setting the flag value
to 0.
• System reset is not required for flag changes to take effect.
LAST_LOGIN_ATTEMPTS If YES, the system displays a record of the last Login of the user.
Default: NO.
For more details, see User Login Record.
LEGACY_EP_CONTENT_DEFAULT
_LAYOUT
Defines the video layout to be displayed on the screen of the legacy
endpoints when switching to Content mode.
Default value: CP_LAYOUT_1P7 (1+7).
For a detailed list of possible flag values for the various video layouts, see
Legacy Endpoint Content Default Layout Flag Values.
MAX_CONF_PASSWORD_REPEAT
ED_DIGITS
Allows the administrator to configure the maximum number of consecutive
repeating characters that are to be allowed in a conference password.
Range: 1 - 4
Default: 2
MCMS_PARAMETERS_USER Flags
Flag Description