Filter
Top Products
System Configuration Flags
Polycom®, Inc. 808
Example:
The following table illustrates the effect of modifying the PREDEFINED_AUTO_LAYOUT_5 flag in
conferences with fewer or more participants than the number of windows selected in the default layout.
LEGACY_EP_CONTENT_DEFAULT_LAYOUT Flag
The following table lists the value for each video layout that can be defined for the
LEGACY_EP_CONTENT_DEFAULT_LAYOUT Flag. It allows the selection of video layout that will be
displayed on the screen of the legacy endpoint when switching to Content mode.
For a list of available layouts see Available Layouts.
CS_ENABLE_EPC Flag
Endpoints that support People+Content may require a different signaling (for example, FX endpoints). For
these endpoints, manually add the flag CS_ENABLE_EPC with the value YES (default value is NO) to the
CS_MODULE_PARAMETERS tab.
Example of Predefined Auto Layouts
Flag
Set to
Possible Value
Number of
Participants
Participant’s View
PREDEFINED
_AUTO_LAYOUT_5
Default =
CP_LAYOUT_1
x2VER
3 Voice activated switching displays the current
speaker in the left window of the video layout and
only the two last speakers are displayed.
7
CP_LAYOUT_I
P5
3
Voice activated switching displays the current
speaker in the large (top left) window of the video
layout.
7
Voice activated switching displays the current
speaker in the top left window of the video layout.