Filter
Top Products
Video Protocols and Resolution Configuration for CP Conferencing
Polycom®, Inc. 123
The following example demonstrate the usage of the sliders.
● Moving the HD720p30 resolution slider from 1024kbps to 1920kbps increases the minimum
connection threshold line rate for that resolution. Endpoints connecting at line rates between
1024kbps and 1920kbps that would have connected at HD 720p30 resolution will instead connect at
SD 30 resolution. Each of the affected endpoints will connect at lower resolution but will use less
video resources.
● Moving the HD1080p30 resolution slider from 4096kbps to 2560kbps decreases the minimum
connection threshold line rate for that resolution. Endpoints connecting at line rates between
2560kbps and 4096kbps that would have connected at HD 720p30 resolution will instead connect at
HD 1080p30 resolution. Each of the affected endpoints will connect at higher resolution but will use
more video resources.
● Moving the HD1080p60 resolution slider from 3584kbps to 2560kbps decreases the minimum
connection threshold line rate for that resolution. Endpoints connecting at line rates between
2560kbps and 4096kbps that would have connected at HD 1080p30 resolution will instead connect
at HD 1080p60 resolution. Each of the affected endpoints will connect at higher resolution but will use
more video resources.
Flag Settings
Setting the Maximum CP Resolution for Conferencing
The MAX_CP_RESOLUTION flag value is applied to the system during First-time Power-up and after a
system upgrade. The default value is HD1080.
All subsequent changes to the Maximum CP Resolution of the system are made by selections in the Max
CP Resolution pane of the Resolution Configuration dialog box.